2010 Honda Fit Photo

2010 Honda Fit - Q&A Page 83

MSRP: $14,900 - $19,110 See Local Classifieds
 
Jump to: Other Expert Sources Consumer Reviews Questions & Answers

2010 Honda Fit Q & A from Around the Web

We have found 3137 user submitted questions on the web and presented the best ones for you to read. This list is in ranked order, showing 329 - 332
My saxo 1.1 ould i e able to put 4 stud hubs straight on to it?
i have a saxo 1.1 currently has three stud hubs. i am thinking of putting 4 stud hubs on to it so i can fit some nicer wheels to it. would they fit if i get the 4 stud hubs off another saxo. thanks
Source: Yahoo! Answers, 1 answer

No need to replace the hubs; http://www.wheels.uk.com/acatalog/fitment-guide-citroen-saxo-3-stud-15.html

Where would i find a wiring diagram to wire a towbar to a Citroen Xsara Picasso?
I want to fit a tow bar onto my 52 plate Xsara Picasso. Where can I find the wirirng details?
Source: Yahoo! Answers, 1 answer

Try Haynes on line.

Can a Dana 30 front and an AMC 20 rear axel withstand the power of a 350 chevy engine?
This is for my Jeep CJ5 with 32 in tires and a dana 20 transfer case. The 350 engine tops off at around 400 hp and it has an SM 420 transmission. Please don't comment if you dont know what your talking about. Thank you for any help. P.S. if the AMC 20 isnt strong enough I am thinking about a Ford 9 inch but what modifications would I have to make...
Source: Yahoo! Answers, 3 answers

hell no! that engine will snap a 20 like a twig. mopar makes a dana 44 for the rear that would probobly b good enough and the 30 in the front is actually not to bad. i think replacing the rear is a must but u could probobly get away with the 30 in the front. just take it easy when in 4wd...

Will this intake fit my '72 302V8?
http://cgi.ebay.com/ebaymotors/small-block-302-ford-polished-aluminum-intake-manifold-/220470649282?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item33551321c2 I just got a holley 600 cfm for my birthday and im going to convert my 1972 f100 to a 4barrel carb. Will this intake fit my truck? It says '83 and later H.O mustangs. Tell me...
Source: Yahoo! Answers, 1 answer

Yes, it will fit. All 302 based engines have the same intake mounting surfaces from the late 60s to 1998.

Other Choices

More Info

Why should I also consider these? X

The entry price is a bit higher for the 2010 Honda Fit compared to most of its peers in the market, but a lot of other factors might make the Fit cheaper in the long run.

Consider its top crash-test ratings and good reputation for reliability and it will likely cost less to own and maintain over many years.

Next to most other hatchback models its size, it feels much more substantial from behind the wheel.

The automatic transmission in the Fit has five speeds, while most others still have four in this price class, which helps bring good performance and fuel economy, along with relaxed highway cruising.

Anti-lock brakes, which are standard on the Fit, are optional or not available on many of its competitors.

Among these competitors, all but the Rio5 have a softer ride than the Fit, but it doesn't necessarily bring more ride comfort; the Rio5 handles quite well but isn't as comfortable at high speeds, and the Versa rides and handles like a larger, heavier car, lacking the Fit's nimble feel.

And none of these models matches the Fit's cargo or backseat space.

Perhaps the most direct rival to the Fit is the xD, but the Scion has neither the high-quality feel nor the jaw-dropping space efficiency of the Fit.


 
© 2012 The Car Connection. All Rights Reserved. The Car Connection is published by High Gear Media. Stock photography by Homestar, LLC. Send us feedback.
 

Use the form below to send us a tip, give us feedback, or just say hello.

(max 750 characters)