Find a Car

Go!

Find the Right Car:

Used Cars

Dodge

By Make

Ram 3500

By Model

1997

Used

By Year

Q&A

Used

By Year

1997 Dodge Ram 3500 - Q&A

MSRP: $20,255 - $25,120 See Local Classifieds

Review

Specs & Prices

Photos

Web Chatter

Jump to: Other Expert Sources Questions & Answers

1997 Dodge Ram 3500 Q & A from Around the Web

We have found 3 user submitted questions on the web and presented the best ones for you to read. This list is in ranked order, showing 1 - 3

1997 dodge ram 3500 TURN SIGNALS AND FLASHERS NOT WORKING?

I HAVE A 1997 DODGE 3500 DIESEL , I WENT TO HOOK A TRAILER UP TO IT TODAY AND SOMETHING SHORTED OUT IT BLEW THE BRAKE AND TURN SIGNAL FUSES , I REPLACED THOSE AND IT FIXED JUST THE BRAKE LIGHTS STILL NO FLASHERS OR TURN SIGNALS SO WENT TO PARTS STORE AND I REPLACED BOTH FLASHER RELAYS( ROUND 2 PRONG ) THAT STILL DIDNT FIX I HAVE BEEN CALLING AND...

Source: Yahoo! Answers, 1 answer

If you are lacking the hazard flashers and turn signals, the multifunction switch may very well have been damaged during the electrical short. Reference:Forty five years of shadetree engineering, racing, and home auto repair, all Mopars, mostly Dodges.

97 dodge ram 3500 v10 eng?

How would I check to see if plug are all firing and check firing box to see if working correct where would I find the fuse for this ware is the gas filter location for 97/v10 Engine will turn over but cant tell if getting gas and have took out a plug and grounded it dont see any spark Need help

Source: Yahoo! Answers, 1 answer

There is no such thing as a "firing box", or a fuse for it. Either you have spark for it or you don't. If not, you have a defective coil, defective PCM, or a dead crank sensor. Fuel pressure is checked with a gauge on the fuel rail, there is no other way. The fuel filter is part of...

97 dodge ram 3500 V10 gas eng?

where is the control crankshaft sensor and the camshaft sensor location on engine and how do you test to see if good or bad Problem engine turns over but will not fire on any cyl no spark what else can I check for this

Source: Yahoo! Answers, 2 answers

The crank sensor is on the back by the bellhousing, the cam sensor is in the distributor. .